Single Ferrule Fittings

Product Details:

Manufacturer exporter and importer of ermeto fittings in India.Ermeto ferrule fittings are made in M.S, SS , SS 316 ,Brass, also in high grade .Ermeto fittings is Parker design fittings that we all make.

This is to ensure leak-free fittings for hydraulic piping.Excellent quality fittings are made by kanti enterprises, we make ermeto fittings from last 30 years.

 

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 5000 PCS P.M.
• Delivery Time: 1 WEEK
• Packaging Details: EXPORT QUALITY

Product Details:

Kanti Enterprises "KE" Band have now completed 30 Years in this Industry.

Kanti Enterprises is Manufacturer of Ermeto Fittings in Inida, High grade quality in product in hydraulic fittings .

We have Parkar Ermeto Fittings available in :

1) Pipe fittings
2) Stainless Steel Pipe Fittings
3) Ferrule Tube Fittings

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Hydraulic Fittings are manufacturer as per DIN 2353 Standard.
Size - 6l to 42l & 6Sto 42S
Grade - CS , SS 304 , SS 316 , BRASS , SS 316TI

Product Details:

Kanti Enterprises the best quality manufacturer for Reducer Union Connectors (DIN 2353) .

We make from 6L to 42L in Light 
We make 6S TO 38S IN heavy Series.

Specification:

DIN 2353 Fittings / Single Ferrule Fittings - Reducer Union Connectors.

Manufactured as per International Standard DIN 2353 / IS 8434-1. It is as per Single Ferrule Design. DIN 2353 Fittings are available in Low Pressure and High Pressure.

Low Pressure DIN 2353 Fittings Range is from 100 Bar to 250 Bar depending on the size.
High Pressure DIN 2353 Fittings Range is from 250 Bar to 630 Bar depending on the size.

DIN 2353 Fittings can be used with Ferrule or with weld nipple. Where Pressure is high Weld nipple is used instead of Ferrule.

Available in Steel, Stainless Steel & Brass.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 1 week

Product Details:

Specification:

Bulkhead Union are used when Hydraulic Circuit is passing from one panel to another. The Check Nut at one end helps to hold the coupling on to the panel.

K.E.” high pressure steel tube fittings are manufactured to DIN 2353 specification and ISO 8434 – 1 for ease of Interchangeability. These fittings are available for different pressure rating from 100 Bar to 630 Bar.

Type : Flare less Bite Type (Single Ferrule) Weld Nipple Type
Standard : DIN 2353 / ISO 8434 - 1 Series : LL (Very Light), L (Light), S (Heavy)
Size : 4 mm to 42 mm, 1/8” OD to 2” OD 1/8” NB to 2” NB
Pressure : Ranging from 100 Bar to 630 Bar depending on type and size
Material : Steel, Stainless Steel, Brass (From extruded bar or forging)
Surface Treatment : Steel – Zinc Coated (A3C) or Phospatised, Trivalent Stainless Steel – Electro polished, Nut Silver Plated to avoid galling Brass – Natural

Additional Information:

• Item Code: BU
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Production Capacity: 10000
• Delivery Time: 1 WEEK
• Packaging Details: box

Product Details:

Kanti Enterprises Manufacturer of Parker Equivalent Fittings in India.

Kanti Enterprises manufactures DIN 2353 single ferrule fittings.

Kanti Enterprises tube fittings are single-ferrule compression fitting which provide leak-tight and remakeable connections in process and analytical instrumentation, control systems, utilities and other applications.

Specifications

• MAWP: 12,000 psig*
• Temperature Range: -325 to 1200°F
• Materials: SS304,SS 316, Alloy 400, C-276, and brass. Other materials are available.
• Sizes: 1/16 to 6 in.
• Adapters: NPT, ISO/BSP, SAE/MS, AN, weld, tube stub, port connectors, and ORFS.
• Shapes: Straight, elbows, tees, crosses, caps, plugs,
• Special fittings: Bulkhead and extended (long), bore through, positionable, calibration and dielectric fittings, silver plated nut.
• Accessories: Stop collars, bulkhead locks, nut and ferrule sets, prewrapped thread, tools and accessories

To provide a reliable, leak-proof connection in instrumentation and process tubing systems, our tube fittings consist of three precision-machined components: body, ferrule, and nut. The single ferrule design, with the spring-like action of the ferrule during make-up, compensates for the variation in tubing materials, hardness, and thickness of the tube wall to provide leak-tight connections in an extensive range of applications.

.Type :Flare less Bite Type (Single Ferrule)

• Standard :DIN 2353 / ISO 8434 - 1
• Series :LL (Very Light), L (Light), S (Heavy)
• Size :4 mm to 42 mm, 1/8” OD to 2” OD, 1/8” NB to 2” NB
• Pressure :Ranging from 100 Bar to 630 Bar depending on type and size
• Material :Stainless Steel , Brass (From extruded bar or forging).

List of countries/Where we export and supply from last 25 years –

Germany, Ghana, Greece, Greenland, Hungary, Iceland, India, Indonesia, Iran, Iraq, Ireland, Israel, Italy, Ivory Coast, Jamaica, Jordan, Kenya, Kuwait, Lithuania, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Mauritius, Mexico, Namibia, Nepal, Netherlands, New Zealand, Niger, Nigeria, Norfolk Island, Mariana Islands, Norway, Oman, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Saudi Arabia, Senegal, Serbia, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Georgia and South Sandwich Islands, South Sudan, Spain, Sri Lanka, Sweden, Switzerland, Tanzania, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, United States, Uruguay, Venezuela, Wallis and Futuna Islands, Yemen, Zambia, Zimbabwe.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Specification:

• We are a reliable bite tube fittings Supplier. Our offered Hydraulic Tube Fittings are available in a wide range like double ferrule, single ferrule, male & female connectors, unions, bulk head union, cross, elbow, tee, tube plug and tube cap in various sizes.
• We manufacturer Hydraulic tube fittings in all grade.
• We are into manufacturing for tube fittings from last 20 years. Kanti Enterprises deals in quality product.
• Hydraulic equipments.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Kanti Enterprises best deal in manufacture & exporter in Ermeto Pipe Fittings.

Our Ermeto Pipe Fittings available in:
1) Stainless Steel Pipe Fittings
2) Pipe Fittings
3) Industrial Pipe Fittings

List of countries/Where we export and supply from last 25 years –

Germany, Ghana, Greece, Greenland, Hungary, Iceland, India, Indonesia, Iran, Iraq, Ireland, Israel, Italy, Ivory Coast, Jamaica, Jordan, Kenya, Kuwait, Lithuania, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Mauritius, Mexico, Namibia, Nepal, Netherlands, New Zealand, Niger, Nigeria, Norfolk Island, Mariana Islands, Norway, Oman, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Saudi Arabia, Senegal, Serbia, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Georgia and South Sandwich Islands, South Sudan, Spain, Sri Lanka, Sweden, Switzerland, Tanzania, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, United States, Uruguay, Venezuela, Wallis and Futuna Islands, Yemen, Zambia, Zimbabwe.

Product Details:

We are Leading manufacture, supplier & exporter in ISO 8434 - 1 Fittings.

Our ISO 8434 -1 Fittings are regularly exported to UAE, Bahrain, Saudi Arbia, Oman, Kuwait, Italy, Egypt, Indonesia, Malaysia, United States, Mexico, Chine, Brazil, Peru, Nigeria,Jordan, Dubai, Thailand (Bangkok), Venezuela, Iran, Germany, UK, Canada, Russia, Turkey, Australia, New Zealand, Sri Lanka, Vietnam, East Africa, South Africa, Kazakhstan

We have Hydraulic Hose Fittings , Hydraulic Hose Pipe & Hose Parts

Product Details:

Kanti Enterprises manufacturer for Hydraulic fittings in Light and heavy series. Hydraulic available in CS, SS 304 , SS 316 , Brass & SS 316TiDIN 2353 tube fittings are used in a wide variety of fluid power applications, especially in factory, oil & gas, and construction equipment. Metric sizes from 4 to 42mm made of carbon steel or stainless steel are most prevalent. DIN (Deutsches Institut für Normung, translated as the German Institute for Standardization) metric and BSPP (British Standard Parallel Pipe) are the most common thread styles in Europe. DIN type tube fittings conform to the requirements of ISO 8434-1, DIN 2353, and DIN EN 3850 standards. This ensures interchangeability among leading brands of fittings.DIN2353 metric fittings are available in three series of tube port end connections: tube-to-tube, tube-to-female port, and tube-to-male thread. They are also offered in three different pressure series—LL for Extra Light and intended for low-pressure applications, L for Light and used medium-pressure applications, and S for Heavy, used high-pressure applications. They are identified by measuring the thread size, pitch and the tube’s outside diameter (OD).

DIN 2353 tube fittings are used in a wide variety of fluid power applications, especially in factory, oil & gas, and construction equipment. Metric sizes from 4 to 42mm made of carbon steel or stainless steel are most prevalent. DIN (Deutsches Institut für Normung, translated as the German Institute for Standardization) metric and BSPP (British Standard Parallel Pipe) are the most common thread styles in Europe. DIN type tube fittings conform to the requirements of ISO 8434-1, DIN 2353, and DIN EN 3850 standards. This ensures interchangeability among leading brands of fittings.

DIN2353 metric fittings are available in three series of tube port end connections: tube-to-tube, tube-to-female port, and tube-to-male thread. They are also offered in three different pressure series—LL for Extra Light and intended for low-pressure applications, L for Light and used medium-pressure applications, and S for Heavy, used high-pressure applications. They are identified by measuring the thread size, pitch and the tube’s outside diameter (OD).

 

As with other compression-style fittings, DIN 2353 fittings consist of a body, cutting ring (ferrule) and nut. DIN connections are used in:

• tube fittings
• alternating valves
• banjo and swivel couplings, and
• check and non-return valves.

A wide variety different configurations and threaded connections enable DIN 2353 fittings to meet many connection challenges. These flareless metric fittings are the most widely used bite-type fittings in the world. As with other compression-style fittings, DIN fittings consist of a body, cutting ring (ferrule) and nut. No O-rings or other elastomeric components are needed to provide a seal. Instead, two cutting edges of a ring (ferrule) bite into the outer surface of the tube, ensuring the necessary holding power and seal for high operating pressures and extreme vibration.

Materials of Construction

As with any fluid power component, DIN 2353 fittings should be made of high-quality materials. Stainless steel 1.4571 (316 Ti) is the gold standard, providing exceptional high-temperature and corrosion resistance. Stainless steel 316 Ti is used in environments with high levels of salt, acids, or near weld seams. Carbon-steel fittings may cost less initially, but the long service life of stainless steel provides a significant reduction in total cost of ownership, leading to fewer parts replacement and lower maintenance costs.

DIN 2353 fittings made of 1.4571 stainless steel fittings withstand harsh environments with the presence of:

• acids,
• dirt,
• high heat,
• shock and impacts.

 

Additional Information:

• Delivery Time: 1 week

Product Details:

Parker Fittings

Features

• Bite Type Fitting or Hydraulic Fittings, manufactured according to ISO 8434-1/DIN 2353 norm is mechanical fitting with a cutting rings for stapling on the tubes.
• The rings helps fast assembly of removable tubes, avoids welding, tapping and flaring, thus it assuring maximum simplicity of complex hydraulic systems.
• During tightening by the nut, the ring deforms according to the bore of the fitting cone and bites into the steel tube, producing deep cut, which is visible due to lifting of an outer edge on the diameter of the tube, allows the water tightness and anti-unthreading of the ring.
• These DIN 2353Tube Fittings ensures a perfect seal, provided that no corrosive fluids be employed and the nominal pressures not be trespassed.

Additional Information:

• Item Code: KE-00095
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Nhava Sheva
• Production Capacity: 50,000 P/M
• Delivery Time: 1 WEEK

Product Details:

Male stud connector din 2353 fittings.

kanti enterprises now the biggest seller in india. Riding on vast volumes of expertise in this arena, we are occupied in offering single ferrule tube fittings. In conformity with the standards as set by the market, these are verified before getting dispatched. More to this, their obtain ability with us at market leading rates makes these highly applauded.

we supply our male syud coupling din 2353 to india,u. S. ,indonesia,brazil,nigeria,bangladesh,russia,mexico,japan,ethiopia,philippines,egypt,viet nam,dr congo,germany,iran,turkey,thailand,u. K. ,france,italy,south africa,myanmar,south korea,kenya,colombia,spain,argentina,uganda,ukraine,algeria,sudan,iraq,poland,canada,afghanistan,morocco,saudi arabia,peru,venezuela,uzbekistan,malaysia,angola,mozambique,nepal,ghana,yemen,madagascar,north korea,cote divoire,australia,cameroon,niger,sri lanka,burkina faso,romania,malawi,mali,kazakhstan,syria,chile,zambia,guatemala,netherlands,zimbabwe,ecuador,senegal,cambodia,chad,somalia,jordan,hungary,united arab emirates,belarus ,honduras,tajikistan,serbia,austria ,switzerland,israel,papua new guinea,togo,sierra leone,bulgaria,laos,paraguay,libya,guinea,south sudan,rwanda,tunisia,belgium,cuba,benin,burundi,bolivia,greece,haiti,dominican republic,czech republic,portugal,sweden,azerbaijan,el salvador,nicaragua,kyrgyzstan,lebanon,turkmenistan ,singapore,denmark,finland,slovakia,congo,norway,eritrea,state of palestine,costa rica,liberia,kuwait,croatia,central african republic,mauritania,panama,moldova,georgia,bosnia & herzegovina,uruguay,mongolia,albania,armeniajamaica,lithuania,qatar,namibia,botswana,lesotho,gambiatfyr macedonia,slovenia,gabon,latvia,guinea-bissau ,bahrain,swaziland,trinidad and tobago,timor-leste,equatorial,solomon,luxembourgislands,montenegroguinea,estonia,mauritius,cyprus,djibouti,fiji,comoros,bhutan,guyana,micronesia,antigua and barbuda,seychelles,andorra,dominica,saint kitts & nevis,marshall islands,monaco,liechtenstein,san marino,palau,nauru,tuvalu,holy see,suriname,cabo verde,maldives,brunei,malta,bahamas,belize,iceland,barbados,vanuatu,sao tome & principe,samoa,saint lucia,kiribatitonga,st. Vincent & grenadines,grenada

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 50000 PCS
• Delivery Time: 1 WEEK

Product Details:

Parker DOZ EO-2 Soft Sealing Ring manufacturer in INIDA.We are manufacturer and supplier of E02 fittings in India we supply to dubai , usa , germany , uk , italy.

Product Details:

Kanti Enterprises Manufacture Ermeto Tube Fittings In India.
Din 2353 Hydraulic Tube Fittings

Bite Type Fitting or Hydraulic Fittings, manufactured according to ISO 8434-1/DIN 2353 norm is mechanical fitting with a cutting rings for stapling on the tubes.

 

 

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 5000 pcs p.m.
• Delivery Time: 1 WEEK
• Packaging Details: EXPORT QUALITY

Product Details:

Kanti manufacturer and expoter for tube fittings & ferrule fittings.
Kanti Tube fittings are exported to India,U.S.,Indonesia,Brazil,Nigeria,Bangladesh,Russia,Mexico,Japan,Ethiopia,Philippines,Egypt,Viet Nam,DR Congo,Germany,Iran,Turkey,Thailand,U.K.,France,Italy,South Africa,Myanmar,South Korea,Kenya,Colombia,Spain,Argentina,Uganda,Ukraine,Algeria,Sudan,Iraq,Poland,Canada,Afghanistan,Morocco,Saudi Arabia,Peru,Venezuela,Uzbekistan,Malaysia,Angola,Mozambique,Nepal,Ghana,Yemen,Madagascar,North Korea,Côte d'Ivoire,Australia,Cameroon,Niger,Sri Lanka,Burkina Faso,Romania,Malawi,Mali,Kazakhstan,Syria,Chile,Zambia,Guatemala,Netherlands,Zimbabwe,Ecuador,Senegal,Cambodia,Chad,Somalia,Jordan,Hungary,United Arab Emirates,Belarus ,Honduras,Tajikistan,Serbia,Austria ,Switzerland,Israel,Papua New Guinea,Togo,Sierra Leone,Bulgaria,Laos,Paraguay,Libya,Guinea,South Sudan,Rwanda,Tunisia,Belgium,Cuba,Benin,Burundi,Bolivia,Greece,Haiti,Dominican Republic,Czech Republic,Portugal,Sweden,Azerbaijan,El Salvador,Nicaragua,Kyrgyzstan,Lebanon,Turkmenistan ,Singapore,Denmark,Finland,Slovakia,Congo,Norway,Eritrea,State of Palestine,Costa Rica,Liberia,Kuwait,Croatia,Central African Republic,Mauritania,Panama,Moldova,Georgia,Bosnia & Herzegovina,Uruguay,Mongolia,Albania,ArmeniaJamaica,Lithuania,Qatar,Namibia,Botswana,Lesotho,GambiaTFYR Macedonia,Slovenia,Gabon,Latvia,Guinea-Bissau ,Bahrain,Swaziland,Trinidad and Tobago,Timor-Leste,Equatorial,Solomon,LuxembourgIslands,MontenegroGuinea,Estonia,Mauritius,Cyprus,Djibouti,Fiji,Comoros,Bhutan,Guyana,Micronesia,Antigua and Barbuda,Seychelles,Andorra,Dominica,Saint Kitts & Nevis,Marshall Islands,Monaco,Liechtenstein,San Marino,Palau,Nauru,Tuvalu,Holy See,Suriname,Cabo Verde,Maldives,Brunei,Malta,Bahamas,Belize,Iceland,Barbados,Vanuatu,Sao Tome & Principe,Samoa,Saint Lucia,KiribatiTonga,St. Vincent & Grenadines,Grenada

Product Details:

Specification:

Kanti Enterprises is one of the highly reputed manufacturers, exporter and suppliers of Single Ferrule Hydraulic Fittings. The offered single ferrule hydraulic fittings are special fabrication for facilitating the connection of two or more parts. Our supplied single ferrule hydraulic fittings are made from high grade iron alloy for ensuring longer serviceability and durability. The offered single ferrule hydraulic fittings are very economically priced.

Features:

• Free from leakage
• Optimally sized
• Low maintenance

Additional Information:

• Item Code: SFHF
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: FOB , EX-WORKS
• Production Capacity: 5000 PC
• Delivery Time: READY STOCK

Product Details:

We are Manufacture of Ermeto High Pressure Fittings in India.

Brand : KE

Kanti Enterprises export are regularly exported to UAE, Bahrain, Saudi Arbia, Oman, Kuwait, Italy, Egypt, Indonesia, Malaysia, United States, Mexico, Chine, Brazil, Peru, Nigeria,Jordan, Dubai, Thailand (Bangkok), Venezuela, Iran, Germany, UK, Canada, Russia, Turkey, Australia, New Zealand, Sri Lanka, Vietnam, East Africa, South Africa, Kazakhstan.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: NHAVA SHEVA
• Production Capacity: 50000 PCS P.M.
• Delivery Time: 1 WEEK
• Packaging Details: EXPORT QUALITY

Product Details:

This Male Run Tees (DIN 2353)

List of countries/Where we export and supply from last 25 years –

 

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Nhava Sheva
• Production Capacity: 50000 pcs p.m.
• Delivery Time: 1 Week or ready stock
• Packaging Details: Export quality

Product Details:

Specification:

1. Bite Type Fitting or Hydraulic Fittings,
2. manufactured according to ISO 8434-1/DIN 2353 norm is mechanical fitting with a cutting rings for stapling on the tubes.
3. The rings helps fast assembly of removable tubes, avoids welding, tapping and flaring, thus it assuring maximum simplicity of complex hydraulic systems.
4. During tightening by the nut, the ring deforms according to the bore of the fitting cone and bites into the steel tube, producing deep cut, which is visible due to lifting of an outer edge on the diameter of the tube, allows the water tightness and anti-unthreading of the ring
5. These DIN 2353Tube Fittings ensures a perfect seal, provided that no corrosive fluids be employed and the nominal pressures not be trespassed.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

We manufacture a comprehensive range of Ermeto Ferrule fittings.

Din 2353 Hydraulic Tube Fittings

Bite Type Fitting or Hydraulic Fittings, manufactured according to ISO 8434-1/DIN 2353 norm is mechanical fitting with a cutting rings for stapling on the tubes.

The rings helps fast assembly of removable tubes, avoids welding, tapping and flaring, thus it assuring maximum simplicity of complex hydraulic systems.

During tightening by the nut, the ring deforms according to the bore of the fitting cone and bites into the steel tube, producing deep cut, which is visible due to lifting of an outer edge on the diameter of the tube, allows the water tightness and anti-unthreading of the ring

These DIN 2353Tube Fittings ensures a perfect seal, provided that no corrosive fluids be employed and the nominal pressures not be trespassed.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

Specification:

• Kanti Enterprises one of the best manufacturer of DIN 2353 single ferrule fittings Din 3015.
• Male Elbow are used to connect tube to Port end.
• One end of the Elbow is connected to Tube and other end is connected to BSP / NPT / UNF Port.
• Male Elbow is manufactured as per DIN 2353 / ISO 8434-1 Standard.
• Type : Flare less Bite Type (Single Ferrule)
• Standard : DIN 2353 / ISO 8434 - 1
• Series : LL (Very Light), L (Light), S (Heavy)
• Size : 4 mm to 42 mm, 1/8” OD to 2” OD, 1/8” NB to 2” NB
• Pressure : Ranging from 100 Bar to 630 Bar depending on type and size
• Material : Stainless Steel , Brass (From extruded bar or forging).

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Features:

• Application: Gas Pipe,Hydraulic Pipe,Chemical Fertilizer Pipe
• Size: 3 inch,1 inch,2 inch

Product Details:

Specification:
KE high pressure steel fittings are manufactured to DIN 2353 specification and ISO 8434 – 1 for ease of Interchangeability. These tee fittings are available for different pressure rating from 100 Bar to 630 Bar

Features:

• Type : Flare less Bite Type (Single Ferrule)
• Weld Nipple Type
• Standard : DIN 2353 / ISO 8434 - 1
• Series : LL (Very Light), L (Light), S (Heavy)
• Size : 4 mm to 42 mm, 1/8”OD to 2”OD, 1/8”NB to 2”NB
• Pressure : Ranging from 100 Bar to 630 Bar depending on type and size
• Material : Steel, Stainless Steel, Brass (From extruded bar or forging)
• Surface Treatment : Steel – Zinc Coated (A3C) or Phospatised, Trivalent
• Stainless Steel – Electro polished, Nut Silver Plated to avoid galling
• Brass – Natural

 

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

Specification:

KE Hydraulic Banjo Elbow is as per International Standard DIN 2353 / ISO 8434-1.

Banjo Elbow are available in 2 types
1) Banjo Fitting and
2) Throttle Free Banjo Fitting

Banjo Elbow is used, because it provides flexibility in choosing the direction of the tube. You need to swivel it around the direction of tube and tight it.

In Banjo Fitting Flow is less while in Throttle Free Banjo Flow is more as compare to Banjo Fitting.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

Specification:

• “K.E” high pressure steel fittings are manufactured to DIN 2353 specification and ISO 8434 – 1 for ease of Inter change ability DIN 2353 Fittings / Single Ferrule Fittings - Union Brass Tees Assembly.
• “K.E” high pressure steel fittings are manufactured to DIN 2353 specification and ISO 8434 – 1 for ease of Interchangeability. These fittings are available for different pressure rating from 100 Bar to 630 Bar
• Type : Flare less Bite Type (Single Ferrule)Weld Nipple Type
• Standard : DIN 2353 / ISO 8434 - 1
• Series : LL (Very Light), L (Light), S (Heavy)
• Size : 4 mm to 42 mm, 1/8” OD to 2” OD, 1/8” NB to 2” NB
• Pressure : Ranging from 100 Bar to 630 Bar depending on type and size
• Material : Steel, Stainless Steel, Brass (From extruded bar or forging)
• Surface Treatment : Steel – Zinc Coated (A3C) or Phospatised , Trivalent
• Stainless Steel – Electro polished, Nut Silver Plated to avoid galling
• Brass – Natural

Manufacturer of hydraulic fittings in INDIA.
Manufacturer of hydraulic fittings in Mumbai.
Manufacturer of hydraulic fittings in UAE.
Manufacturer of hydraulic fittings in Oman.
Manufacturer of hydraulic fittings in U.K
Supplier of Hydraulic fittings in U.K.
Supplier of Hydraulic fittings in Mumbai.
Supplier of Hydraulic fittings in India.
Supplier of Hydraulic fittings in Oman.
Supplier of Hydraulic fittings in Dubai.
Supplier of Hydraulic fittings in Norway.
Supplier of Hydraulic fittings in Vietnam.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

Specification:

• “K.E” high pressure steel fittings are manufactured to DIN 2353 specification and ISO 8434 – 1 for ease of Interchangeability. These tee fittings are available for different pressure rating from 100 Bar to 630 Bar
• Type : Flare less Bite Type (Single Ferrule)
• Weld Nipple Type
• Standard : DIN 2353 / ISO 8434 - 1
• Series : LL (Very Light), L (Light), S (Heavy)
• Size : 4 mm to 42 mm, 1/8”OD to 2”OD, 1/8”NB to 2”NB
• Pressure : Ranging from 100 Bar to 630 Bar depending on type and size
• Material : Steel, Stainless Steel, Brass (From extruded bar or forging)
• Surface Treatment : Steel – Zinc Coated (A3C) or Phospatised, Trivalent
• Stainless Steel – Electro polished, Nut Silver Plated to avoid galling
• Brass – Natural

Our Hydraulic Equal Tee (DIN 2353) are regularly exported to UAE, Bahrain, Saudi Arbia, Oman, Kuwait, Italy, Egypt, Indonesia, Malaysia, United States, Mexico, Chine, Brazil, Peru, Nigeria,Jordan, Dubai, Thailand (Bangkok), Venezuela, Iran, Germany, UK, Canada, Russia, Turkey, Australia, New Zealand, Sri Lanka, Vietnam, East Africa, South Africa, Kazakhstan

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

DIN 2353 tube fittings are most commonly used in the industrial hydraulics and pneumatics field.

Available in three series of tube port end connections to satisfy a variety of system requirements.

Metric O.D. sizes range from 4mm to 42mm in three materials; brass, carbon steel, and stainless steel. Numerous body configurations and threaded connections allow DIN 2353 fittings to meet many connection challenges.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

Specification:
Bite Type Fitting or Hydraulic Fittings, manufactured according to ISO 8434-1/DIN 2353 norm is mechanical fitting with a cutting rings for stapling on the tubes.

The rings helps fast assembly of removable tubes, avoids welding, tapping and flaring, thus it assuring maximum simplicity of complex hydraulic systems.

During tightening by the nut, the ring deforms according to the bore of the fitting cone and bites into the steel tube, producing deep cut, which is visible due to lifting of an outer edge on the diameter of the tube, allows the water tightness and anti-unthreading of the ring

These DIN 2353Tube Fittings ensures a perfect seal, provided that no corrosive fluids be employed and the nominal pressures not be trespassed.

Sizes: Fittings are manufactured in three ranges to be chosen according to the required
working conditions:
- "LL" extra light range, suitable for low and medium working pressures up to
max. 100 bar in SS and upto max. 65 bar in MS.
- "L" light range, suitable for medium/high pressure applications, however
not over 315 bar in SS and upto max. 205 bar in MS .
- "S" heavy range, for severe conditions, with high pressures, water hammering, high temperatures and a maximum pressure of 630 bar in SS and upto max. 410 bar in MS.

However, pressure rating shall also change with respect to the diameter of the tubing used. Bigger to tubing size, lesser shall be the pressure withstanding capacity. This is to be particularly noted when using large size of tubing.

These ERMETO tube fittings are manufactured from 1/4” to 2” in OD & Nominal Bore Tubes, 4mm to 12mm in Very Light “LL” Series Metric OD Tubes 6mm to 42 mm in Light Series “L” Metric OD Tubes 6mm to 38 mm in Heavy Series “S” Metric OD Tubes

Material of Construction: Steel, SS-304, SS-316, Brass, etc.,Material conforming to NACE MR 01-75 is available on specific requests

We supply in Mumbai , maharashtra, ahmedabad, Hyderabad,Rajkot, Egypt, UAE and many other parts of the world.

Our Din 2353 Hydraulic Tube Fittings are regularly exported to UAE, Bahrain, Saudi Arbia, Oman, Kuwait, Italy, Egypt, Indonesia, Malaysia, United States, Mexico, Chine, Brazil, Peru, Nigeria,Jordan, Dubai, Thailand (Bangkok), Venezuela, Iran, Germany, UK, Canada, Russia, Turkey, Australia, New Zealand, Sri Lanka, Vietnam, East Africa, South Africa, Kazakhstan

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Bite Type Fitting or Hydraulic Fittings, manufactured according to ISO 8434-1/DIN 2353 norm is mechanical fitting with a cutting rings for stapling on the tubes.

The rings helps fast assembly of removable tubes, avoids welding, tapping and flaring, thus it assuring maximum simplicity of complex hydraulic systems.

During tightening by the nut, the ring deforms according to the bore of the fitting cone and bites into the steel tube, producing deep cut, which is visible due to lifting of an outer edge on the diameter of the tube, allows the water tightness and anti-unthreading of the ring.

 

These DIN 2353Tube Fittings ensures a perfect seal, provided that no corrosive fluids be employed and the nominal pressures not be trespassed.

Sizes: Fittings are manufactured in three ranges to be chosen according to the required
working conditions:
- "LL" extra light range, suitable for low and medium working pressures up to
max. 100 bar in SS and upto max. 65 bar in MS.
- "L" light range, suitable for medium/high pressure applications, however
not over 315 bar in SS and upto max. 205 bar in MS .
- "S" heavy range, for severe conditions, with high pressures, water hammering, high temperatures and a maximum pressure of 630 bar in SS and upto max. 410 bar in MS.

However, pressure rating shall also change with respect to the diameter of the tubing used. Bigger to tubing size, lesser shall be the pressure withstanding capacity. This is to be particularly noted when using large size of tubing.

These ERMETO tube fittings are manufactured from 1/4” to 2” in OD & Nominal Bore Tubes, 4mm to 12mm in Very Light “LL” Series Metric OD Tubes 6mm to 42 mm in Light Series “L” Metric OD Tubes 6mm to 38 mm in Heavy Series “S” Metric OD Tubes

Material of Construction: Steel, SS-304, SS-316, Brass, etc.,Material conforming to NACE MR 01-75 is available on specific requests

Our DIN 2353 Copper Tube Fittings are regularly exported to UAE, Bahrain, Saudi Arbia, Oman, Kuwait, Italy, Egypt, Indonesia, Malaysia, United States, Mexico, Chine, Brazil, Peru, Nigeria,Jordan, Dubai, Thailand (Bangkok), Venezuela, Iran, Germany, UK, Canada, Russia, Turkey, Australia, New Zealand, Sri Lanka, Vietnam, East Africa, South Africa, Kazakhstan

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Specification:
Being a client-centric firm we manufacture, export and supply a wide array of Parker Tube Fittings which is highly demanded by the clients for its precision and accuracy. Owing to high grade features like corrosion resistant, high strength and abrasion resistant makes this range commended amongst the clients. Moreover, our range is available in the market in various sizes and shapes.

Features:

• Easy to use
• Easy to fit
• Durable

We make in all the grade.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

Kanti Enterprises-KE

Specification

• Bulkhead Union Elbows (DIN 2353)
• Type : Flare less Bite Type (Single Ferrule)
• Standard : DIN 2353 / ISO 8434 - 1
• Series : LL (Very Light), L (Light), S (Heavy)
• Size : 4 mm to 42 mm, 1/8” OD to 2” OD, 1/8” NB to 2” NB
• Pressure : Ranging from 100 Bar to 630 Bar depending on type and size
• Material : Steel, Stainless Steel, Brass (From extruded bar or forging)
• Surface Treatment : Steel – Zinc Coated (A3C) or Phospatised, Trivalent
  Stainless Steel – Electro polished, Nut Silver Plated to avoid galling
• Brass – Natural

Our Bulkhead Elbow (DIN 2353) are regularly exported to UAE, Bahrain, Saudi Arbia, Oman, Kuwait, Italy, Egypt, Indonesia, Malaysia, United States, Mexico, Chine, Brazil, Peru, Nigeria,Jordan, Dubai, Thailand (Bangkok), Venezuela, Iran, Germany, UK, Canada, Russia, Turkey, Australia, New Zealand, Sri Lanka, Vietnam, East Africa, South Africa, Kazakhstan

Product Details:

Specification:

DIN 2353 Hydraulic Fittings --Our client can avail high quality range of Hydraulic Bite Fittings. Our range of tube and pipe fittings are given surface protection to guarantee long life even in the most corrosive atmosphere. This range is available in market at very competitive prices.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 50000 PCS
• Delivery Time: 1 WEEK

Product Details:

Our Banjo Elbow Bspp are regularly exported to UAE, Bahrain, Saudi Arbia, Oman, Kuwait, Italy, Egypt, Indonesia, Malaysia, United States, Mexico, Chine, Brazil, Peru, Nigeria,Jordan, Dubai, Thailand (Bangkok), Venezuela, Iran, Germany, UK, Canada, Russia, Turkey, Australia, New Zealand, Sri Lanka, Vietnam, East Africa, South Africa, Kazakhstan

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

Specification:

We are manufacturer and supplier of Stainless Steel NPT Nipple. We cater Stainless Steel NPT Nipple at best price to valued customer.
Our Stainless Steel NPT Nipple are regularly exported to UAE, Bahrain, Saudi Arbia, Oman, Kuwait, Italy, Egypt, Indonesia, Malaysia, United States, Mexico, Chine, Brazil, Peru, Nigeria,Jordan, Dubai, Thailand (Bangkok), Venezuela, Iran, Germany, UK, Canada, Russia, Turkey, Australia, New Zealand, Sri Lanka, Vietnam, East Africa, South Africa, Kazakhstan

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Production Capacity: 50000 PCS
• Delivery Time: 1 WEEK

Product Details:

we are Leading Manufacture of Hydraulic Male Connector in India.

Brand : KE

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: Nhava Sheva
• Production Capacity: 50000 PCS P.M.
• Delivery Time: 1 week
• Packaging Details: Export Quality

Product Details:

Male Tee is manufacture as per DIN 2353 / IS 8434-1 standard. The Design is Single Ferrule. Male Tee are available in 2 type :- Male Branch Tee and Male Run Tee. In Male Branch Tee, Port end (BSP, NPT) is on the center and in Male Run Tee Port end (BSP, NPT) is on side.

Male Tee is as per Single Ferrule Design and available in Steel, Stainless Steel & Brass.

Application :- Hydraulic & Pneumatic usage.

Additional Information:

• Item Code: HMT
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: FOB , EX-WORKS
• Production Capacity: 10000
• Delivery Time: As per order quantity we can make up rush orders

Product Details:

Specification:
Along with several other kind of industrial equipments in the market, we are also providing our clients one of the most excellent quality Equal Cross Fittings. These Equal Cross Fittings are made up of very high grade raw materials and hence are very much efficient, reliable and long lasting. Our company always keeps consistency in the quality of its products and hence retains its reputation in the market. Our Equal Cross Fittings are widely used and accepted in several regions of the country and are appreciated for its supreme functionality and reliable performance.

 

Features:

• Easy installation
• Affordable prices
• Durable material quality
• Tough and tensile material quality

Additional Information:

• Delivery Time: 1 week

Product Details:

Kanti Enterprsies stock holder and manufacturer of Hydraulic banjo coupling DIn 2353 . Hydraulic banjo coupling size available from 6L to 42L and 6S to 38S Grade - Cs , SS , brass

Additional Information:

• Item Code: KEBANJO5D0
• Production Capacity: AS PER REQUEST
• Delivery Time: AS PER REQUEST
• Packaging Details: AS PER REQUEST

Product Details:

Kanti Enterprises Manufacture Tube End Reducer DIN 2353 Fitting In India.

Tube End Reducer -- DIN 2353 Fitting / Single Ferrule Fitting / Bite Type Fitting / 24Deg cone fitting

• Tube End Reducer is manufactured as per DIN 2353 Standard / ISO 8434 -1 standard
• It is used to connect 2 tubes of different size
• In Tube end reducer one nut is preinstalled on it
• Tube end reducer can be of ferrule type of Oring type

Our TUBE END REDUCER DIN 2353 are regularly exported to UAE, Bahrain, Saudi Arbia, Oman, Kuwait, Italy, Egypt, Indonesia, Malaysia, United States, Mexico, Chine, Brazil, Peru, Nigeria,Jordan, Dubai, Thailand (Bangkok), Venezuela, Iran, Germany, UK, Canada, Russia, Turkey, Australia, New Zealand, Sri Lanka, Vietnam, East Africa, South Africa, Kazakhstan

Additional Information:

• Item Code: 02500F0
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)

Product Details:

Product Specification:

Straight Coupling is other superb quality materials which our company is providing to its clients at a very convenient range of prices. We are one of the most renowned and well known companies which are extensively engaged in the manufacture, exporter and supply of several kinds of supreme quality industrial products in the market. We are making use of all the latest quality technologies and high grade raw materials for the manufacture of this Straight Coupling. Our Straight Coupling is very tough and tensile and is manufactured in a very robust shape.

Features:

• Strong and robust
• Easy installation
• Economical
• Low maintenance

Our Straight Coupling are regularly exported to UAE, Bahrain, Saudi Arbia, Oman, Kuwait, Italy, Egypt, Indonesia, Malaysia, United States, Mexico, Chine, Brazil, Peru, Nigeria,Jordan, Dubai, Thailand (Bangkok), Venezuela, Iran, Germany, UK, Canada, Russia, Turkey, Australia, New Zealand, Sri Lanka, Vietnam, East Africa, South Africa, Kazakhstan

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)