Manifold Valves

Product Details:

Kanti Enterprises Manufacture Stainless Steel Double Block & Bleed Gauge Vales in India.



Our Stainless Steel Double Block & Bleed Gauge Valves are regularly exported to UAE, Bahrain, Saudi Arbia, Oman, Kuwait, Italy, Egypt, Indonesia, Malaysia, United States, Mexico, Chine, Brazil, Peru, Nigeria,Jordan, Dubai, Thailand (Bangkok), Venezuela, Iran, Germany, UK, Canada, Russia, Turkey, Australia, New Zealand, Sri Lanka, Vietnam, East Africa, South Africa, Kazakhstan

Product Details:

Kanti Enterprises Manufacture Double Block Bleed Valves in India.

Forged modular Double Block & Bleed Valves are weight, space & cost saving over traditional hook –ups, combining piping & instrument valves in one compact design. Paramount for pressure instruments take-off points, sampling systems, drains for tanks & pipes where space is restricted, hydraulic power unit systems.

• Available in Material: Stainless Steel, CS A105, Brass, Monel, Hastelloy, Titanium, etc.

All Valves are proof Shell tested at 1.5 times full rated pressure & pneumatic test of the Seats at 80psi thereby ensuring suitability for use across a wide operating range. And a 1.1 times full rated Hydrostatic Seat Test.
Our Double Block Bleed valves are regularly exported to UAE, Bahrain, Saudi Arbia, Oman, Kuwait, Italy, Egypt, Indonesia, Malaysia, United States, Mexico, Chine, Brazil, Peru, Nigeria,Jordan, Dubai, Thailand (Bangkok), Venezuela, Iran, Germany, UK, Canada, Russia, Turkey, Australia, New Zealand, Sri Lanka, Vietnam, East Africa, South Africa, Kazakhstan

Product Details:

We are involved in manufacturing and exporting a wide range of Five Way Manifolds, which is known for sturdy construction and high performance. These are used for connecting system impulse lines transmitters. The five valve manifolds are rated for pressures as high as 6000 PSI at 200⁰ F or 4000 PSI at 500⁰ F with PTFE packing. Further, for a higher temperature Grafoil Packing is used.

This manifold consists:

• 1/2" NPT (F)
• Pipe to flange or flange to flange connections on 54mm (2 1/8") centers,
• One equalizer valve, two block valves
• One bleed valve and 2 nos 1/4" NPT(F) purge (VENT) connections

Additional Information:

• Item Code: mv005
• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 5000
• Delivery Time: 1 week

Product Details:

Kanti Enterprises Manufacture 3 way manifold valves, Stainless steel manifold valve, manifold valve ,

Manifold valves size are 1/4' to 1' that we offer ,
we offer in C.S , SS , SS 316, Duplex And Super Duplex As Well.

Our 3 way Manifold Valves are regularly exported to UAE, Bahrain, Saudi Arbia, Oman, Kuwait, Italy, Egypt, Indonesia, Malaysia, United States, Mexico, Chine, Brazil, Peru, Nigeria,Jordan, Dubai, Thailand (Bangkok), Venezuela, Iran, Germany, UK, Canada, Russia, Turkey, Australia, New Zealand, Sri Lanka, Vietnam, East Africa, South Africa, Kazakhstan

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 5000
• Delivery Time: 1 WEEK

Product Details:

Kanti Enterprises Manufacture Instrumentation Manifold Valves In India.

Specification:
Material of construction : carbon steel plated / ss – 304 ss – 316maximum working pressure 400 kg (6000 psi

Features:
Ideal for use on pressure gauges, pressure switches, pressure transmitters, pressure controllers other pressure sensing instruments available in two different model (remote type “t” type)
Combination : 2 valve manifold / 3 valve manifold 5 valve manifold end connection 1/2" npt (f) with vent provision
Material of construction : carbon steel plated / ss – 304 ss – 316maximum working pressure 400 kg (6000 psi

 

Product Details:

We are the manufacturer of Stainless Steel316, 2Way Female Manifold Valve , 6000 psi.

Our 2 Way Female Manifold Valves are regularly exported to UAE, Bahrain, Saudi Arbia, Oman, Kuwait, Italy, Egypt, Indonesia, Malaysia, United States, Mexico, Chine, Brazil, Peru, Nigeria,Jordan, Dubai, Thailand (Bangkok), Venezuela, Iran, Germany, UK, Canada, Russia, Turkey, Australia, New Zealand, Sri Lanka, Vietnam, East Africa, South Africa, Kazakhstan

Product Details:

We offers a variety of precision engineered manifold valves in 2, 3, and 5-valve Manifolds in Direct and Remote Mount styles with vent configurations to meet most flow, pressure and level measurement application requirements.

KE 2–valve manifolds are designed for static pressure and liquid level applications; the 3 and 5 valve manifolds are well suited for use with most differential pressure transmitters and can accept both female and flange process impulse line connections.

We work extensively with a large proportion of its clients in customising designs and configurations. We are well equipped to reproduce any “special” valve manifold manufactured in the past. We will also work with any client in tailoring and producing a precision product with any number of valves; configured to meet the specific requirements of the system.

Also available in in G series range of valves for high pressure applications with design pressures currently to 20,000 and 30,000 psi.

Standard Features

• 6000psi standard Maximum Working Pressure
• Hydrostatically tested to 1.5 times Maximum Working Pressure. In accordance with EN 12266
• Full 316/316L St.St. Dual Certified, compliant to ISO 15156/NACE MR-01-75 & NORSOK M-630
• Valves have trace code on body with original mill certificates available all to EN 10204-3.1
• High Tolerance NPT Thread Engagement with 5-6 threads engaged when fully tightened
• All valves and manifolds are individually boxed for protection and storage
• Laser etching – valve detail on body
• Bonnet locking pin safely locks the bonnet to body
• Ø 4.76 Standard tip thru bore (CV = 0.4) Fully open

Product Details:

Our firm is consistently engaged in the supplying a solution of industrial requirements known as 2 Way Manifold Valves. These manifolds are widely used in all industries for assisting several needs of pipes. These valves are available with perfect shapes and sizes.

Specifications:

• Connection : 1/2” Female NPT to 1/2” Female NPT
• One-piece, high strength body construction for safety no welding used.
• Stems feature an non-rotating top with an easily replaceable soft insert.
• Bonnet lock pin prevents accidental valve disassembly.
• 316 stainless steel construction for superior corrosion resistance
• Bonnet-to-body seals are metal-to-metal-no O-Rings used.
• Mounting holes provided for self supporting applications
• 100% pressure tested for shut-off and at all seals
• Manifolds feature at 4:1 safety factor

Features:

• Longer life
• Efficient working
• Exact shape

 

 

Additional Information:

• Item Code: KE-2MV
• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 5000
• Delivery Time: 1 WEEK

Product Details:

Kanti Enterprises Manufacture Stainless Steel Manifold Valves In India.We are a known provider of Manifold Valves, which can be availed in two valve, three valves and five valves configurations. High-grade SS 304, SS 316, CS and a wide range of optional materials are used in manufacturing our products. The valves on every manifold are tested for leakage at the packing with nitrogen at 2000 PSI.

We are best and excellent quality manufacturer when it comes to Valves , we export our valves to Afghanistan, Albania, Algeria, Andorra, Angola, Antigua, Barbuda, Argentina , Armenia,Australia,Austria,Azerbaijan,Bahamas,Bahrain,Bangladesh,Barbados,Belarus,Belgium,Belgium, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Burkina Faso ,Burundi, Burundi, Cabo Verde, Canada, Chad, Cambodia ,Chile, Colombia, Costa Rica, Cyprus, Congo, Democratic Republic of the, Cuba ,Croatia, Denmark, Djibouti, Dominica, Dominican Republic, Ecuador , Egypt, El Salvador, Equatorial Guinea , Eritrea, Estonia, Ethiopia, Fiji, France, Gabon Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea-Bissau, Guyana, Haiti, Honduras, Hungary ,Iceland, India, Indonesia, Iran, Iraq, Ireland, Israel, Italy, Jamaica ,Japan, Jordan, Kazakhstan,Kenya,Kiribati,Kosovo,Kuwait,Kyrgyzstan,Laos,Latvia,Lebanon,Lesotho,Liberia,Libya,Liechtenstein, Lithuania,Luxembourg,Madagascar,Maldives,Malawi,Malaysia,Mauritius,Mauritania,Mali,Mexico,Monaco,Myanmar (Burma),Morocco ,Mongolia, Namibia, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, Niger, Nigeria ,North Korea, Norway ,Oman ,Pakistan, Palau ,Palestine, Panama ,Papua New Guinea, Paraguay,Peru,Philippines,Poland,Qatar,Romania,Russia,Rwanda,Saudi Arabia, St. Lucia, Senegal, Sierra Leone, Slovakia, Singapore, Slovenia, Somalia, St. Kitts and Nevis, South Africa, St. Vincent and The Grenadines, Serbia, South Korea, South Sudan, Spain, Sri Lanka, Sudan, Suriname,Swaziland,Sweden,Switzerland,Taiwan,Tajikistan,Tanzania,Zimbabwe,Thailand,Timor-Leste,Uganda,Togo,Turkey,Tunisia,Turkmenistan,Trinidad and Tobago ,Tonga, Syria, Tuvalu, United Arab Emirates, Ukraine ,United Kingdom (UK),United States of America (USA),Uruguay, Vietnam, Venezuela, Vatican City (Holy See),Uzbekistan, Yemen, Zambia.

 

Product Details:

Kanti Enterprises Manufacture Carbon Steel Manifold Valves In India.

• Material : CS
• Brand : KE

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 1 WEEK

Product Details:

Product Description:

Our company is well known in the market for the export and supply of a high quality of Carbon Steel Five Valve Manifolds which have been manufactured using a high quality of raw materials which have been procured from well known vendors in the market and they have been priced at very reasonable rates in the market. These products are high on demand in the market and they have been made using the best technology available in the market.

Features –

• Durable
• Non-corrosive
• Cost effective

Our CS Manifold Valves are regularly exported to UAE, Bahrain, Saudi Arbia, Oman, Kuwait, Italy, Egypt, Indonesia, Malaysia, United States, Mexico, Chine, Brazil, Peru, Nigeria,Jordan, Dubai, Thailand (Bangkok), Venezuela, Iran, Germany, UK, Canada, Russia, Turkey, Australia, New Zealand, Sri Lanka, Vietnam, East Africa, South Africa, Kazakhstan

Product Details:

Kanti Enterprises Manufacture T-Type Manifold Valves In India.

We manufacturer high quality , with all the test done and then sell a satisfitied prodcut.

Brand : KE

Features:

• Flawlessly finished
• Sturdy design
• Rust proof

 

Product Details:

We are Leading Manufacture & Exporter in MS Manifold Valves.

Features:

• Brand : KE
• Material : MS

Product Details:

Kanti Enterprises Manufacture Stainless Steel Bleed Gauge Valve in India.


Our Stainless Steel Single Block & Bleed Gauge Valve are regularly exported to UAE, Bahrain, Saudi Arbia, Oman, Kuwait, Italy, Egypt, Indonesia, Malaysia, United States, Mexico, Chine, Brazil, Peru, Nigeria,Jordan, Dubai, Thailand (Bangkok), Venezuela, Iran, Germany, UK, Canada, Russia, Turkey, Australia, New Zealand, Sri Lanka, Vietnam, East Africa, South Africa, Kazakhstan

Product Details:

Kanti Enterprises Manufacture Double Block & Bleed Gauge Valves in India.


Our Double Block & Bleed Gauge Valves are regularly exported to UAE, Bahrain, Saudi Arbia, Oman, Kuwait, Italy, Egypt, Indonesia, Malaysia, United States, Mexico, Chine, Brazil, Peru, Nigeria,Jordan, Dubai, Thailand (Bangkok), Venezuela, Iran, Germany, UK, Canada, Russia, Turkey, Australia, New Zealand, Sri Lanka, Vietnam, East Africa, South Africa, Kazakhstan

Product Details:

SS. 304 Manifold Valves

• High Quality
• Made of Stainless Steel
• Available in various sizes
• Manufactured as per requirement

Our SS 304 Manifold Valve are regularly exported to UAE, Bahrain, Saudi Arbia, Oman, Kuwait, Italy, Egypt, Indonesia, Malaysia, United States, Mexico, Chine, Brazil, Peru, Nigeria,Jordan, Dubai, Thailand (Bangkok), Venezuela, Iran, Germany, UK, Canada, Russia, Turkey, Australia, New Zealand, Sri Lanka, Vietnam, East Africa, South Africa, Kazakhstan

Product Details:

Product Specification:

Kanti Enterprises leading Supplier ,exporter & manufacture in Manifold Valve in India.

Manifold Valve Available in Grades I.e. SS 316 / SS 304

Product Details:

Kanti Enterprises Manufacture H Series Manifold Valves In India.

"H" type manifolds or M3VM30 series of valve manifolds consist of shut off valves and equalizing valve. These manifolds are designed for mounting directly to D.P. transmitters having 54mm (2-18") center to center connections.
The oval flanges supplied with the D.P. transmitters are used on the process side of these manifolds for piping connection. This model provides easy installation and comes complete with found mounting bolts and two PTFE "O" rings for ready installation.

Product Details:

Kanti Enterprises Leading Manufacture, supplier & Exporter in Titanium Manifold Valve.

Product Description:2-,3- and 5- Way manifold Valves

Jeetan offers a variety of 2-,3- 5 valve instrument manifold. The 2- valves manifolds are designed for static pressure and liquid level application; the 3-and 5- valve manifolds are designed for differential pressure applications.

Features:-

• Convenient method of blocking, bleeding ,and calibrating pressure instruments
• Designed for connected system impulse line & transmitter
• Combine the function of a tee, calibration valve,isolation valve,all tubing and fittings in a single valve configuration
• Bonnet lock pins prevent accidental loosing
• Free swiveling ball end stem (metal seat,std.)assurance bubbles tight valve closure without seat galling
• Special hardened ball seat is ideal for both gas and liquid service
• All stem packing is located below the stem threads preventing galling corrosion and contaminations
• Adjustable packing reduces the possibility of bonnet/body leaks
• Full back -sealed bonnets prevents accidental stem removal and blowout

Technical

• Working pressure up to 6000 psig (413 bar)
• Temperature up to 450°F (232°C)with PTFE packing up to 1200°F(648°C) with Grafoil® packing
• Orifice Size :0.156inch (4.0 mm)
• For block and bleed (or calibration) of a gauge -or absolute -pressure transmitter or gauge
• Consists of equalizing , isolation and vent
• Direct instrument mount and remote mount
• End connections 1/2 pipe or flange
  

Type Applications

• General plant service
• Pressure instrumentation devices
• Differential pressure instruments devices
• Pressure equalitzation
• Block and bleed applications.
  

T-Type (single flange, pipe to flange)
Manifolds bolt directly to the differential pressure instruments which eliminate the need for unnecessary piping,valves and fittings.T-Type manifolds come complete with mounting kit for quick and easy installation to a pipe stand.

R-Type valve Designs
R-Type (pipe to pipe in-line )manifolds are designed for differential pressure of flow recorder to impulse tubing.Connections are 1/2" NPT industry standard and 2-1/8" (54 mm)center dimension( Model for 2 3/16" & 21 /4" dimension(Model for 2 3/16" &21/4"-center dimension.

H-Type (Dual flange, flange to flange)
Manifolds bolts directly to the differential pressure instruments which eliminate the need for unnecessary piping,valves and fittings.

Product Details:

H-Type 3 way Manifold Valve in INDIA, Germany, Ghana, Greece, Greenland, Hungary, Iceland, India, Indonesia, Iran, Iraq, Ireland, Israel, Italy, Ivory Coast, Jamaica, Jordan, Kenya, Kuwait, Lithuania, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Mauritius, Mexico, Namibia, Nepal, Netherlands, New Zealand, Niger, Nigeria, Norfolk Island, Mariana Islands, Norway, Oman, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Romania, Russia, Saudi Arabia, Senegal, Serbia, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Georgia and South Sandwich Islands, South Sudan, Spain, Sri Lanka, Sweden, Switzerland, Tanzania, Trinidad and Tobago, Tunisia, Turkey, Uganda, Ukraine, United Arab Emirates, United Kingdom, United States, Uruguay, Venezuela, Wallis and Futuna Islands, Yemen, Zambia, Zimbabwe.

Product Details:

We are Leading Manufacture , Exporter & Supplier in 254 SMO Manifold valve.

Our 254 SMO Manifold valve are regularly exported to UAE, Bahrain, Saudi Arbia, Oman, Kuwait, Italy, Egypt, Indonesia, Malaysia, United States, Mexico, Chine, Brazil, Peru, Nigeria,Jordan, Dubai, Thailand (Bangkok), Venezuela, Iran, Germany, UK, Canada, Russia, Turkey, Australia, New Zealand, Sri Lanka, Vietnam, East Africa, South Africa, Kazakhstan

Our 254 SMO Manifold valve Available in manifold Valve, stainless steel Manifold valve & Two Valve Manifold

Product Details:

We manufacture and supplier of quality Manifold Valves in in various designs like two way, three way, four way and Five way.

Our Super Duplex Manifold Valve available in

1) Manifold valve
2) Stainless Steel Manifold Valve
3) Three Valve Manifold

Product Details:

Kanti Enterprises Leading manufacture & Exporter in Duplex Manifold Valve. We are manufacture Duplex Manfold Valves in different design as follows.

1) Two Way Manifold Valve
2) Three Way Manifold Valve
3) Five Way Manifold Valve

Product Details:

Our 3000 PSI Manifold Valve are regularly exported to UAE, Bahrain, Saudi Arbia, Oman, Kuwait, Italy, Egypt, Indonesia, Malaysia, United States, Mexico, Chine, Brazil, Peru, Nigeria,Jordan, Dubai, Thailand (Bangkok), Venezuela, Iran, Germany, UK, Canada, Russia, Turkey, Australia, New Zealand, Sri Lanka, Vietnam, East Africa, South Africa, Kazakhstan

Product Details:

Product description:

A wide array of configurations are available such as 2 Way T - Type Manifold Valves , 3 Way Manifold Valves and 5 Way Manifold Valves We also manufacture customized Manifold Valves in various styles , shapes and sizes.KE is one of the reputed Manifold Valves manufacturer.

Material
SS 316 , SS 304 , CS , Hastelloy , Monel

List of countries/Where we export and supply from last 25 years.

 

Product Details:

Kanti Enterprises mnaufcaturer for Mono Flange Block & Bleed Valve in inida.
Size 1/4'' to 1''.
Pressure - 3000 psi , 6000 psi , 10000 psi.
Grade - CS , SS 304 , SS 316 , MONEL 400 , INCONEL 625 , HASTELLOT C276.

Product Details:

Air Header Manifold Valve.

Product Details:

Kanti Enterprises Manufacture Multi -Port Gauge Valves in India.

Multi- Port gauge valves is designed for giving the user flexibility in positioning of gauges or pressure switches. Permits installation of gauge in the end or side of the valve. These valves can be supplied with vent valve & blanking plug separately.

• Available in Materials	:	Stainless Steel, CS A105, Brass, Monel, Hastelloy, Titanium etc.
  End Connections	:	1/4" To 3/4" Male / Female Threaded
  Test Pressure	:	25°C Room Temperature
  Hydrostatic	:	Body - 620 Bar Seat - 413 Bar
  Pneumatic	:	Seat - 60 Bar
  Finish	:	CS Zinc Plated, SS Natural

Our Multi - Port Gauge Valves are regularly exported to UAE, Bahrain, Saudi Arbia, Oman, Kuwait, Italy, Egypt, Indonesia, Malaysia, United States, Mexico, Chine, Brazil, Peru, Nigeria,Jordan, Dubai, Thailand (Bangkok), Venezuela, Iran, Germany, UK, Canada, Russia, Turkey, Australia, New Zealand, Sri Lanka, Vietnam, East Africa, South Africa, Kazakhstan

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Product Details:

Product Details Split-Flow (Pre-mounted) Manifold

Enerpac Split-Flow Pre-mounted Manifolds enable multiple hydraulic connections to be made at one central location.

Hose Fittings & Accessories

Components for use with the Enerpac range of high-pressure hydraulic equipment. All fittings and valves are 700 bar pressure-rated and have 3/8 - 18 NPTF threads.

Note

Working pressure quoted is the maximum acceptable system pressure: 700 bar (10k bar).

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: DOOR DELIOVERY
• Production Capacity: 500
• Delivery Time: 2 WEEK
• Packaging Details: AS ACTUAL